AP23 anti-corrosion pressure transmitter adopts high-performance corrosion-resistant core, and uses anti-corrosion materials such as polytetrafluoroethylene and anti-corrosion alloy with strong anti-corrosion performance. AP23 anti-corrosion pressure sensor can measure various corrosive media and is suitable for various fields requiring anti-corrosion Precise measurement and control of sexual fluid and gas pressure.
* A variety of corrosion-resistant materials are available
* Resistant to a variety of corrosive media and wear-resistant
* High comprehensive precision, suitable for a wide range of media
* Good long-term stability
* The shell material can be selected according to the measuring medium
* Medical Technology
* Environmental detection technology
* Petroleum, chemical industry
* Electroplating technology
* Pharmaceutical industry
| Measuring Range | -100KPa~0~1kpa… 260Mpa(optional) | |
| Overload Capability | 1.5~2 times full-scale pressure (with damping can resist 300% instantaneous impact) | |
| Burst Pressure | 4xFS(≤5MPa) | |
| Durability | ﹥1×106 cycle（P:10~90%FS） | |
| Pressure Type | Gauge / Absolute | |
| Measuring medium | Gas or liquid compatible with ceramic, 316 stainless steel, titanium diaphragm, tantalum diaphragm, etc. | |
| Response time | ≤5ms | |
| Resolution | >10-5（Usually limited acquisition display device, theoretically infinitely small） | |
| Accuracy (linear,hysteresis, repeatability) | Typical：±0.5%FS | |
| Long-term stability | Typical：±0.1%FS/year | Maximum：±0.2%FS/year |
| Zero temperature drift | Typical：±0.02%FS/℃ | Maximum：±0.05%FS/℃ |
| Sensitivity temperature drift | Typical：±0.02%FS/℃ | Maximum：±0.05%FS/℃ |
| Medium Temperature | -20～80℃ |
| Ambient Temperature | -20～85℃ |
| Compensation Temperature | -10～70℃(default) special customizable |
| Insulation resistance | ＞ 100 MΩ，100VDC |
| Shell Protection | Plug type(IP65)；Cable type(IP67) Compliance IEC 60529 standard |
| Certification | CE |
| Code | Standard signal(with short circuit protection) | Supply voltage with polarity protection | Power supply-Current | Load(R) | Output Impendence |
| A1 | 4~20mA | DC 9~30V | Max.25mA | R≤(U-9)/0.02Ω | |
| V1 | 1~5V DC | DC 9~30V | 8mA | R≥50kΩ | <2kΩ |
| V2 | 0~5 V DC | DC 9~30V | 8mA | R≥50kΩ | <2kΩ |
| V3 | 0.5~4.5V DC | DC 9~30V | 8mA | R≥50kΩ | <2kΩ |
| V4 | 0.5~4.5V DC | DC 5±0.25V | 8mA | R≥50kΩ | <2kΩ |
| Interface and housing | Stainless steel 304, 316, titanium alloy, Hastelloy, can be customized |
| O-ring | Viton, PTFE, Nitrile, can be customized |
| Sensor Diaphragm | Ceramic / 316 stainless steel / titanium / tantalum diaphragm |
| AP23 | G | 016B | A1 | F2 | W2 | S |
| Model | Pressure type | Pressure Range | Output | Thread size | Electrical connection | Wetted medium |
| AP23 | G=Gauge A=Absolute |
001B=1bar 002B=2bar 003B=3bar 004B=4bar 005B=5bar 006B=6bar 007B=7bar 010B=10bar 020B=20bar 050B=50bar …… |
A1=4~20mA V1=1~5V V2=0~5V V3=0.5~4.5V （8~30VDC supply） V4=0.5~4.5V（5VDCsupply） |
F2= G ¼ male F3=¼NPT male F4=M12x1.5 F0= Customized |
W1= Straight Out 1m cable W2=A type HSM plug W3=M12 corner out 1m W4=M12 Straight Out 1m W0= Customized |
PP PV PVDF PTFE、 316L（optional） |
