The high frequency dynamic pressure transducer is specially designed for military engineering, chemical explosion test, petroleum investigation and exploitation, petroleum well test, material, mechanics, civil engineering, geo-mechanics, traumatic medicine, hydraulic power mechanical test.
The dynamic pressure transducer adopts high performance chip of a foreign company, using micro machining technology to enable small effective dimensions and high intrinsic frequency of the integrated silicon chip. Dynamic pressure transducer has good elastic and mechanical properties, and its comprehensive performance is better than that of piezoelectric dynamic pressure sensor.
* Stainless steel enclosure, with excellent corrosion resistance
* Wide pressure measuring range
* Intrinsic frequency up to 2MHz
* Stable working
* Strong interference immunity
* Genuine imported module with stable performance
* Small dimensions, light weight, a variety of types and high cost performance
* Wide range of measured medium
Measuring range | -100KPa~0~1KPa…20KPa…100MPa | |||
Overload capacity | Two times FS pressure ((1.1 times FS pressure for 100MPa product) | |||
Pressure type | Gauge pressure or absolute pressure | |||
Measured medium | Gas or liquid compatible with 316 stainless steel | |||
Overall accuracy | ±0.1 %FS | ±0.25%FS | ±0.5%FS | |
Intrinsic frequency | 150KHz~700KHz | 500KHz~1MHz | 1MHz~2MHz | |
Band width of transducer | 0~1KHz~3KHz | 0~20KHz | 0~200KHz | |
Rise time | 0~0.2mS~75μS | 0~12μS | 0~1μS | |
Long-term stability | Typical: ±0.1%FS/ year | Maximum: ±0.2%FS/ year | ||
Operating temperature | -40℃~85℃ generally | -10℃~250℃ specially | ||
Zero point temperature drift | Typical: ±0.02%FS/℃ | Maximum: ±0.05%FS/℃ | ||
Sensitivity temperature drift | Typical:±0.02%FS/℃ | Maximum: ±0.05%FS/℃ | ||
Range of power supply | 12~36VDC (24VDC generally) | ±15VDC standard switching power supply | ||
Signal output | 4~20mA / 1~5 V DC / 0~5V DC | |||
Load resistance | ≤(U-12)/0.02Ω | |||
Enclosure protection degree | Plug-in type (IP65); cable type (IP67) | |||
Vibration error | ≤±0.01%FS(Axles X, Y, Z,200Hz/g) | |||
Port and enclosure | Stainless steel 1Cr18Ni9Ti | |||
O-ring | Fluo rubber | |||
Sensor diaphragm | Stainless steel 316L or mono – crystalline silicon | |||
Safe explosion- proof | Ex ia IICT6 | |||
Insulation resistance | 100MΩ,500V DC | |||
Resolution | Infinite small (theoretical) 1 / 100000 (general) |
AP90T | High Frequency Dynamic Pressure Transducer | ||||||
Code | Pressure type | ||||||
G | Gauge pressure ( G, may not be indicated) | ||||||
A | Absolute pressure (A) | ||||||
Range | ( 0~ X KPa or MPa) Measuring Range | ||||||
Code | Band width of transducer | ||||||
H1 | 0~1KHz~3KHz | ||||||
H2 | 0~20KHz | ||||||
H3 | 0~200KHz | ||||||
Code | Overall accuracy (linear + repeatability + lagging) | ||||||
1 | ±0.5%FS | ||||||
2 | ±0.25%FS | ||||||
3 | ±0.1%FS | ||||||
Code | Signal Output | ||||||
A1 | 4~20mA | ||||||
V1 | 1~5V DC | ||||||
V2 | 0~5V DC | ||||||
Code | Additional functions | ||||||
F1 | M20x1.5 external thread | ||||||
F2 | G1/4 external thread | ||||||
F0 | Special | ||||||
W1 | Cable type (IP67, 2m) | ||||||
W2 | Socket type (IP65, DIN 43650) | ||||||
P | Flush diaphragm | ||||||
E | Intrinsically safe explosion-proof type Ex iaIICT5 | ||||||
T1 | Free field (specially used for blasting) | ||||||
T2 | High – temperature resistant type: Up to 250 ℃ for balanced use,Up to 2000 ℃ for transient use | ||||||
AP90T(0~500KPa)—H1 —1 —V2 —F1 —W1 —E – T2 High Frequency Dynamic Pressure Transducer |