AP10 OEM pressure transmitter is a high-reliability and durable product of high-volume, controllable cost OEM. AP10 pressure transmitter is produced with internationally advanced ceramic (95% AL2O3) piezoresistive sensor cores and has an ultra-wide operating temperature range and the compact design and other features are suitable for precise measurement and control of liquid and gas pressure in many fields.
* Super high cost performance
* Compact design
* High reliability and durability
* Ultra wide working temperature range
* Compressor Water Pump
* Constant pressure water supply
* Automotive Electronics
* Construction machinery, industrial process control and monitoring
* Steel, light industry, environmental protection
* Medical, agricultural machinery, testing equipment supporting
Measuring Range | -0.1~0~500KPa…10MPa | |
Overload Capability | 1.5~2 times full-scale pressure (with damping can resist 300% instantaneous impact | |
Burst Pressure | 4xFS (≤15MPa) | |
Durability | ﹥1×106 Cycle (P:10~90%FS) | |
Pressure Type | Gauge | |
Measuring medium | Gas or liquid compatible with ceramic and 304 stainless steel | |
Response time | ≤5ms | |
Resolution | 0.02%FS | |
Accuracy(linear, hysteresis, repeatability) |
Typical: ±0.5~1%FS | Maximum: ±2%FS |
Long-term stability | Typical: ±0.2%FS/year | Maximum: ±0.4%FS/year |
Zero temperature drift | Typical: ±0.02%FS/℃ | Maximum: ±0.04%FS/℃ |
Sensitivity temperature drift | Typical: ±0.02%FS/℃ | Maximum: ±0.04%FS/℃ |
Medium Temperature | -40~125℃ |
Ambient Temperature | -20~85℃ |
Compensation Temperature | 0~50℃ |
Vibration resistance | 10g IEC 60068-2-6 |
Impact resistance | 50g/11ms IEC 60068-2-27 |
EMC-launch | EN61000-6-3 |
Insulation resistance | ﹥100MΩ 100VDC |
Shell Protection | Plug type(IP65); Cable type(IP67) Compliance IEC 60529 standard |
Certification | CE |
Code | Standard signal(with short circuit protection) | Supply voltage with polarity protection | Power supply-Current | Load(R) | Output Impendence |
A1 | 4~20mA | DC 9~30V | Max.25mA | R≤(U-9)/0.02 | |
V1 | 1~5V DC | DC 9~30V | 8mA | R≥50k | <2k |
V2 | 0~5 V DC | DC 9~30V | 8mA | R≥50k | <2k |
V3 | 0.5~4.5V DC | DC 9~30V | 8mA | R≥50k | <2k |
V4 | 0.5~4.5V DC | DC 5±0.25V | 8mA | R≥50k | <2k |
Interface and housing | Stainless Steel 304L |
O-ring | Fluororubber |
Sensor Diaphragm | AL2O3 |
AP10 | G | 010B | A1 | F2 | W2 | S |
Model | Pressure type | Pressure Range | Output | Thread size | Electrical connections | Remark |
AP10 | G=Gauge | 005B=5bar G 010B=10bar G 016B=16bar G 025B=25bar G 040B=40bar G 060B=60bar G 100B=100bar G Customized |
A1=4~20mA V1=1~5V V2=0~5V V3=0.5~4.5V V4= Customized |
F1=M20x1.5 Male F2= G ¼ Male F3= ¼ NPT F4=7/16-20UNF(F) F5=1/2-20UNF(F) F0= Customized |
W1= Straight Out 1m cable W3=M12 corner out 1m W4=M12 Straight Out 1m W5= Packard Connector W0= Customized |
T=Special |
Model example: AP10G010BA1F2W5
Range: 0-10bar; Gauge: Output: 4-20mA; Accuracy: ±1%FS typical; Supply: 9~30V DC, ; Pressure Connection: G ¼ Male; Electrical Connection: Packard Connector
Remarks: It can be customized if the order quantity exceeds a certain amount. Please contact the sales engineers for details.
Specifications subject to change without notice. All rights reserved. All corporate names and trademarks stated herein are the property of their respective companies