Steam pressure transducer and transmitter are all stainless steel structures, and imported high temperature resistant pressure sensors are used as signal measurement sensitive components. The pressure of the measured medium is transmitted to the sensor through the heat dissipation structure on the transmitter, and the sensor probe can be at -65 ℃ below zero. And long-term reliable work at high temperature of 400 ℃, this steam pressure transmitter is widely used in liquid and vapor pressure measurement and control industries in high temperature fields.
* Heat dissipation structure design, can withstand medium and high temperature
* A variety of pressure interface options, cost-effective
* High comprehensive precision and wide operating temperature range
* Optional integrated digital display head
Performance Parameter:
| Measuring Range | 0~100KPa…100MPa | |
| Overload Capability | 2 times full-scale pressure (max.150MPa)、 | |
| Burst Pressure | 4xFS(≤150MPa) | |
| Durability | ﹥1×107 cycle（P:10~90%FS） | |
| Pressure Type | Gauge / Absolute | |
| Measuring medium | Gas or liquid compatible with Titanium/silicon | |
| Response time | ≤5ms | |
| Resolution | 0.01%FS | |
| Accuracy (linear,hysteresis, repeatability) | Typical：±0.5%FS | Maximum：±1%FS |
| Nonlinear | Typical：±0.25%FS | Maximum：±0.5%FS |
| Hysteresi + Repeatability | Typical：±0.15%FS | Maximum：±0.2%FS |
| Long-term stability | Typical：±0.15%FS/year | Maximum：±0.2%FS/year |
| Zero temperature drift | Typical：±0.02%FS/℃ | Maximum：±0.03%FS/℃ |
| Sensitivity temperature drift | Typical：±0.02%FS/℃ | Maximum：±0.03%FS/℃ |
Environmental Conditions:
| Medium Temperature | -65～400℃ |
| Ambient Temperature | -40～80℃ |
| Compensation Temperature | -10～70℃ |
| Vibration resistance | ±20g IEC 60068-2-6 |
| Impact resistance | 1000g/1ms IEC 60068-2-27 |
| EMC | EN61000-6 |
| Shell Protection | Plug type(IP65)；Cable type(IP67) Compliance IEC 60529 standard |
| Certification | CE |
Electrical Specifications:
| Code | Standard signal(with short circuit protection) | Supply voltage with polarity protection | Power supply-Current | Load(R) | Output Impendence |
| A1 | 4~20mA | DC 9~30V | Max.25mA | R≤(U-9)/0.02Ω | |
| V1 | 1~5V DC | DC 9~30V | 8mA | R≥50kΩ | <2kΩ |
| V2 | 0~5 V DC | DC 9~30V | 8mA | R≥50kΩ | <2kΩ |
| V3 | 0.5~4.5V DC | DC 9~30V | 8mA | R≥50kΩ | <2kΩ |
| V4 | 0.5~4.5V DC | DC 5±0.25V | 8mA | R≥50kΩ | <2kΩ |
Material:
| Interface and housing | Stainless Steel 304L，customizable |
| Sensor Diaphragm | Titanium/Silicon |
| AP25 | G | 025B | A1 | F1 | W2 |
| Model | Pressure type | Pressure Range | Output | Thread size | Electrical connection |
| AP25 | G=Gauge A=Absolute |
001B=1bar G\A 002B=2bar G\A 004B=4bar G\A 010B=10bar G\A 016B=16bar G\A 025B=25bar G\A 035B=35bar G\A 040B=40bar G\A 060B=60bar 100B=100bar 250B=250bar 400B=400bar 600B=600bar 01kB=1000bar |
A1=4~20mA V1=1~5V V2=0~5V V3=0.5~4.5V（8~30VDC supply） V4=0.5~4.5V （5VDCsupply） V5=RS485 V6= Customized |
F1=M20x1.5 male F2= G ¼ male F3= ¼ NPT male F0= Customized |
W1= Straight Out 1m cable W2=A type HSM plug W3=M12 corner out 1m W4=M12 Straight Out 1m W0= Customized |
Model example: AP25G025BA1F1W3
Range：0-25bar,Gauge; Output: 4-20mA; Accuracy: ±0.5%FS typical; Supply: 9~30V DC; Pressure Connection: M12x1 corner out 1m
Remarks: It can be customized if the order quantity exceeds a certain amount. Please contact the sales engineers for details
Specifications subject to change without notice. All rights reserved. All corporate names and trademarks stated herein are the property of their respective companies
English 
Spanish 
Russian 
French 
Korean 
Japanese 
Italian 
German 
Arabic